Chinese wolfberry culturing method

Nursery should pay attention to water temperature, water quality and feeding methods.
1. The water temperature should be maintained at about 30°C as much as possible after the temperature of the water reaches the holding pool or appliance.
2. Water quality To maintain freshness, water quality should be diligently cleaned and disinfected. Timely removal of excreta from a small amount of baits and ticks in holding tanks or holding appliances. According to the quality of the water, it is necessary to change the water in a timely manner. The water temperature of the exchanged water and the old water should be consistent or almost equal. The water level in the pool is maintained at 0.1-0.2m. To facilitate habitat, small plants such as duckweed can be placed on the surface of the water.
3. Feeding methods Feed feeding should be scheduled at regular intervals. When the water temperature is around 20°C, it should be fed twice a day, that is, every morning at 8 o'clock and at 4 o'clock in the afternoon. When the water temperature is 30°C, it can be fed 3 times due to high food intake, that is, feeding at 1am, 1pm, and 6pm.
Feeding Feed Types: Juveniles should put in some high-protein, low-fat, easily digestible feeds, such as leeches, chopped egg yolks, fresh fish, fresh animal organs of livestock and poultry, and so on.
Feeding amount: The amount of feed each time is 5% -10% of the carcass weight, and the amount of daily feed is 10% -20% of carcass weight.
4. Incubating young fish while raising larvae The larvae of larvae, which have a high survival rate, have a high growth rate and a strong physique. Therefore, the cultivation of leeches is greatly beneficial to the growth of larvae. Hydra breeding methods are as follows:
1 Disinfect dedicated ponds for leeches, kill leeches, pine algae, cockroaches and wild fish.
2 Fermentation of composted compost juice is used to cultivate phytoplankton. The main foods for leeches are algae, bacteria, and tiny organic debris.
3 introduction. The otters spawn in the spring, summer and autumn. 1-4 days can be hatched as larvae, 5-8 days mature, life span from weeks to months. Gradually grow the strong fleas as mothers and put them into the pool to breed.
About 41 weeks after receiving the water bottle feed, 0.8 kg can be collected in a cubic meter of water.
Do not let the water spoil when feeding leeches. It was found that there were filamentous green pods or larvae in the water. Frequently fertilize the pool, keep the water brooding and replenish phytoplankton, and provide a balanced diet for crickets. In addition, it is necessary to take food and drink immediately to prevent water quality from affecting water quality.

Germany imported beads


Imported French lens


mould Die-casting  Eight edge type Revolving arm


Optional emergency power supply≥3 hours



Product features:

1.Ideal cold light effects.

Using the new LED cold light source, energy saving and environmental protection and long service life up to 80,000hours or more. Temperature increase over surgeon`s head < 1℃.


LED do not engender infrared ray and ultraviolet radiation, it doesn`t have the temperature rise and tissue damage caused by halogen shadowless light, can accelerate the wound healing after surgery, and has no Radiation pollution.


LED color temperature constant, soft, very close to the natural sun light.

2.Excellent shadowless effect

Lamp with the most scientific radian,Multi point light source design, so that more fullness of the light spot,When the lamps are partially occluded, also can achieve perfect shadowless effect.


Lamp panel radius of gyration: ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.

3.Excellent deep lighting

4.Advanced control system

The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.


It offers illuminance memory function.

5.Universal suspension system

Rotating arm, a new type of alloy material is made of eight edge type.

Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°, The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.

The equipped with fatigue correcting unit and fix position hand handle device, easy to fix position after long time use.

6.Modern laminar lamp

The thickest part of lamp-chimney is not more than 10cm.


The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment, easily adjust, flexible fixed.

Mobile Type LED Operating Light

Mobile Type LED Operating Light,Mobile Operating Light,Mobile LED Surgical Light,Movable LED Operating Lamp

Shandong qufu healthyou Medical Technology co.,Ltd ,