Vegetarians Size 0 Empty Capsule Vegetarians Size 0 Empty Capsule,Hpmc Shell Empty Vegan Capsules,Hpmc Capsules Vegan Empty,Pharmaceutical Gelatin Veggie Capsules Empty Ningbo Jiangnan Capsule Co., Ltd. , https://www.jncapsule.com
Correct repair and maintenance of extruder
(1) The bearings of the machine should be regularly lubricated with grease. After operating for 500 hours, it is recommended to replace the grease. For new machines, make sure to add fresh grease before starting operation. Additionally, the oil should be changed after 200 hours of use to ensure smooth running and reduce wear.
(2) Other bearing components should also be greased on a regular basis to maintain their performance and extend their service life.
(3) During disassembly, avoid using any tools that could damage screws, screw sleeves, or other consumable parts. Also, do not place hard objects inside the expansion chamber to prevent damage to internal components.
(4) Always clean the raw materials before feeding them into the machine to avoid foreign objects such as metal particles from entering and causing damage to internal parts.
(5) Regularly inspect the extruder’s condition and check for worn-out parts. Replace any damaged or worn components promptly to maintain efficiency and safety.
(6) Keep the area around the equipment clean and free from debris to ensure safe operation and easy maintenance.
(7) If the machine is not in use for an extended period or if the expanded material has been changed, make sure to thoroughly clean the expansion chamber. This prevents material agglomeration, mold growth, or cross-contamination between different batches.
(8) Wearing parts near the discharge port tend to wear faster than those near the feed port. Therefore, when replacing these parts, always start from the discharge end and replace them in sequence to ensure even wear and optimal performance.
(Word count: 512)