Many people are unaware of how to properly adjust the brushing device on a labeling machine. However, with the right knowledge, it's actually a straightforward process that can significantly improve the performance and accuracy of the machine. Here are four key points to consider when adjusting the brushing device:

1. Ensure that the center of the label is perfectly aligned, and the edges on both sides are symmetrical. This helps in achieving a neat and professional appearance after labeling.

2. The label brush should be positioned perpendicular to the surface of the container. This ensures even pressure and prevents misalignment or damage to the label during application.

3. The overlapping gap for the brushing action on the container should be carefully adjusted. For a single pressing brush, the overlap should be between 10 mm and 15 mm, while for a combined pressing brush, it should be between 5 mm and 10 mm. Proper overlap ensures full coverage without excessive pressure.

4. The distance between the cleaning brush and the sponge should be maintained at 1 mm to 2 mm. This allows for effective cleaning without causing unnecessary wear on the components.

Proper adjustment of the brushing device not only improves labeling quality but also extends the lifespan of the machine. If you're new to this process, it's always a good idea to refer to the manufacturer's manual or consult an expert for guidance. With a bit of practice and attention to detail, you'll be able to fine-tune your labeling machine efficiently.

This article was written by (labeling machine) experts to help users better understand and maintain their equipment.

Leg Massager

leg massager with heat,leg massager machine,best leg massager,leg massager air compression,leg massage at home,leg massager best

Shenzhen Urion Technology Co., Ltd. , https://www.urionhealth.com